DooxSwitch VMware image

From DooxSwitch wiki
Jump to: navigation, search

VMWare images for testing.

Use this link to download VMWare image.

Extract downloaded file and import image to VMware Player which can be downloaded from here . The Image can be also imported to vCenter 6.5 or higher



Default Login details:

Default root password is: super@p4ss

make sure you change the password after you login

after you login to console please setup your ethernet interfaces and gateway

ifconfig eth 0.0.0.0 netmask 255.255.255.0
route add default gw 0.0.0.0 eth 

don't forget to replace the "0.0.0.0" with your real address

after you setup your network , go ahead and update the ip in /etc/asterisk/sip.conf to reflect changes

just in case make sure all directories are writable

chmod 777 /var/www/html/protected/runtime
chmod 777 /var/www/html/assets
chmod 777 -R /var/www/html/protected/config/
chmod 777 /var/www/html/protected/modules/billing/config/settings.php
chmod 777 -R /var/www/html/protected/modules/sms/config/
chmod 777 -R /var/www/html/sounds/
chmod 777 -R /var/www/html/uploads/
chmod 777 /var/www/html/console.php

point your browser to the ip and follow the GUI install steps on the screen

check this section on how to install DooxSwitch GUI and modules. if you need help with locating the license key check this manual

  • Please note this testing option has limitation of 5 simultaneous outgoing/incoming calls (no limitation on internal calls within the system)